Your shopping cart is empty!
A7
-400x400.jpg "A7")
-400x400.jpg "A7")
Product Code: A7
Availability: In Stock
Availability: In Stock
Price: $14.95
The A7 is a chrome plated re-buildable dripping atomizer. Similar to our Phoenix, the A7 has a replaceable silica wicking system. To use the A7, remove the top casing with the mouthpiece attached from the bottom base casing. You will see silica wick with kanthal wiring coiled around the wick into your two screws. Prime the wick by coating it with e-Liquid. The wick should take about 10 drops before it is fully saturated. Do not fill the ventilation hole below the coiling with e-Liquid, as this will clog your system. Rather, let your e-Liquid saturate the wicks and drown the moat the wicks are set in. Place the top casing back onto your base and prime with 5-10 puffs at 3.7 volts to start.
The Large A7 will hold more liquid and come with 1x mini flathead screw driver to aid you in easing tension on the screws to slide in your new coil when you replace your wicking system. The Big A7 does NOT come with two additonal wicks and does NOT come in a small case.
The Small A7 will hold less liquid and come with 1x mini flathead screw driver to aid you in easing tension on the screws to slide in your new coil when you replace your wicking system. The Small A7 will also come with two additional silica wicks.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Vapure USA, Inc of San Diego California (
Powered By OpenCart
Vapure Electronic Cigarettes and eLiquid © 2013
View Mobile / Standard
Vapure Electronic Cigarettes and eLiquid © 2013